 |
|
Enhanced Features:
 • Microprocessor based temperature controller, with integrated Automatic tuning, and PID (Proportional band, Integral time, Derivative time) • Honeywell digital chart recorder • AC Tech variable frequency (variable speed) conveyor motor drive • Eclipse "Air Heat" burner • FM, IRI, and NFPA compliant gas pipetrain • New York Blower fans • FECO's unique design ceramic insert slider bed • Ashworth premium flat wire belt • Steel-It premium, type 316 stainless steel impregnated coating on all structural steel • Exclusively Aluminized sheet metal used throughout the oven • Removable drip pans
| | |
 |
The oven depicted is a gas-fired, single zone, continuous oven being utilized as a DRAW OVEN. Rated for 650°F, our customer is able to heat treat 3,460 lbs. of product per hour. To meet the customers' needs, this oven was designed with removable drip pans, 48 inch wide carbon steel flat wire belt, our exclusive ceramic slider bed, and a variable speed conveyor drive. In addition the structural steel was coated with A #316 stainless steel industrial spray coating. The approximate overall dimensions are 14 feet long X 7 feet wide X 12 feet high.
Specifications:
TEMPERATURE RANGE • 550°F operating temperature, 650°F maximum temperature
OVERALL SIZE (approximate) • 14' long x 7' wide x 12' high
HEAT SOURCE • Natural Gas
HEATING CAPACITY • 1,000,000 BTUH burner
PRODUCTION RATE • 3,460 lbs. of steel per hour
TOTAL NOMINALWORKSPACE • 12 cubic feet (4' x 8' x 4-1/2")
AIR DISTRIBUTION TYPE • Convection - top down
AIR CHANGES • 32 per minute
NUMBER OF ZONES • (1) one
INSULATION CONSTRUCTION • 4 inch "Stop Gap" panel construction, with 6 lb. per cubic foot high temperature mineral wool insulation
|